Ram Power Seat Conversion Kit | Driver for Ram DS & HD 2014-2026

Upgrade Comfort with a Ram Drivers seat conversion kit

Tired of being uncomfortable in the Ram Tradesman, 2500, 3500, 4500 Work Truck. For more information and videos see our Power Seat Conversion Kit Guide. A Power Driver Seat Conversion Kit will make your daily drive more comfortable. Upgrade to a powered driver seat with powered lumbar and get all the comfort adjustments of the higher end Rams! These driver power seat conversion kits have 10-way power: raise and lower front and rear, fore and aft powered adjustments, powered tilt/recline and the all important powered lumbar support for your back.

What's Included

A complete OEM 10-way powered Ram seat frame, you can remove your existing seat, move your wire harness, airbag, foam and upholstery to your new powered seat frame. To finish installation add a 12 volt isolated powered wire and ground from your battery to under your seat. Connect the wires to our Power Conversion Kit and you are finished. Check out the Ram HD Driver Seat Conversion Kit Installation Instructions. This is everything you need to complete the installation.

If you are not the do-it-yourself type and don't have "A Guy"

We suggest that you contact any reputable car upholstery shop in your area to complete the transformation of a manual seat to a powered seat. Note that some upholstery shops will not deal with adding the 12 volt power wires to the power seat conversion kit frame. The reputable upholsters who work with custom seat builds will deal with adding power. However any of your local car audio shops will get the positive and negative 12 volt wires installed under your seat for your new power conversion kit. The conversion kits will require 12 gauge wire and a 30 amp circuit. Most of our customers or their shops are using an inline slow blow circuit breaker to get power wire from the main fuse panel to underneath the seat.

 If you have any of these Ram models below, this power seat conversion kit will work for you. 

• 2014 - 2018 Ram 1500 
  
• 2014 - 2026 Ram 2500 HD
• 2014 - 2026 Ram 3500 HD 
• 2014 - 2026 Ram 4500 HD
• 2014 - 2026 Ram 5500 HD
• 2019 - 2026 Ram 1500 Classic
• This kit will not work with the 2019 and up Ram 1500 DT New Body Style 5th Gen.

Condition Description 

These frames are low mileage used frames. These frames are completely refurbished and tested. They are sand blasted and painted black to resist rust, the motors are tested and all pivot points are greased for longevity. See our Conversion Kit Difference Video for our All our Powered Conversion Kits. It's not a Ram Seat, but all of our Conversion Kits go through the same refurbishing process.

Frequently Asked Questions

• I bought a base-model Ram work truck without power seats. Can I actually upgrade to a full power seat?

• Yes. Many truck owners opt for the base model to save money on fleet or work packages, only to regret missing out on daily comfort. Our conversion kits let you easily add full power capabilities to your Ram without compatibility issues.

• Will adding a power seat conversion kit trigger an airbag light or code on my newer Ram truck?

• No. Because you transfer your original factory manual wire harness and seat belt receptor, and air bag onto our power frame, your truck's computer thinks the factory setup is completely untouched. Your airbag system and BCM remain totally happy, meaning zero dash lights or error codes.

• Will this mess up my truck's CAN bus system or blow fuses?

• Not at all. The power mechanism runs on a completely isolated 12-volt circuit wired directly to the battery or an auxiliary fuse block. It completely bypasses the CAN bus system so your vehicle's sensitive onboard computers never detect it, keeping everything safe and compatible.

• Are these cheap aftermarket frames or genuine factory equipment?

• These are genuine Ram OEM factory frames. They are original equipment built to exact factory safety and structural specifications, ensuring a bulletproof, seamless bolt-in fit using your truck's original mounting points.

• Do I have to cut anything or modify my truck's interior?

• No cutting or permanent modifications are required. The frame bolts straight into your truck's factory floor pan holes, and you reuse your existing factory foam, upholstery, safety components, and headrests so your interior keeps its original look.

• How hard is the installation?

  Most DIYers with basic tools can knock out the component and material transfer in an afternoon, and any local car audio shop can easily run the isolated 12-volt power and ground wire under the seat if your not comfortable doing it yourself.

• Can I get a matching power conversion kit for the passenger side?

• Absolutely. Because as every truck owner knows, keeping your co-pilot comfortable is a priority especially your better half. They demand a power seat just as much as you do so we also offer a Ram passenger side power conversion kit. Keep the peace in the cab and make sure the passenger seat is just as comfortable as the driver's.